2.22. V4L2 fwnode kAPI

struct v4l2_fwnode_bus_mipi_csi2

MIPI CSI-2 bus data structure

Definition

struct v4l2_fwnode_bus_mipi_csi2 {
  unsigned int flags;
  unsigned char data_lanes[V4L2_FWNODE_CSI2_MAX_DATA_LANES];
  unsigned char clock_lane;
  unsigned char num_data_lanes;
  bool lane_polarities[1 + V4L2_FWNODE_CSI2_MAX_DATA_LANES];
};

Members

flags

media bus (V4L2_MBUS_*) flags

data_lanes

an array of physical data lane indexes

clock_lane

physical lane index of the clock lane

num_data_lanes

number of data lanes

lane_polarities

polarity of the lanes. The order is the same of the physical lanes.

struct v4l2_fwnode_bus_parallel

parallel data bus data structure

Definition

struct v4l2_fwnode_bus_parallel {
  unsigned int flags;
  unsigned char bus_width;
  unsigned char data_shift;
};

Members

flags

media bus (V4L2_MBUS_*) flags

bus_width

bus width in bits

data_shift

data shift in bits

struct v4l2_fwnode_bus_mipi_csi1

CSI-1/CCP2 data bus structure

Definition

struct v4l2_fwnode_bus_mipi_csi1 {
  unsigned char clock_inv:1;
  unsigned char strobe:1;
  bool lane_polarity[2];
  unsigned char data_lane;
  unsigned char clock_lane;
};

Members

clock_inv

polarity of clock/strobe signal false - not inverted, true - inverted

strobe

false - data/clock, true - data/strobe

lane_polarity

the polarities of the clock (index 0) and data lanes index (1)

data_lane

the number of the data lane

clock_lane

the number of the clock lane

struct v4l2_fwnode_endpoint

the endpoint data structure

Definition

struct v4l2_fwnode_endpoint {
  struct fwnode_endpoint base;
  enum v4l2_mbus_type bus_type;
  struct {
    struct v4l2_fwnode_bus_parallel parallel;
    struct v4l2_fwnode_bus_mipi_csi1 mipi_csi1;
    struct v4l2_fwnode_bus_mipi_csi2 mipi_csi2;
  } bus;
  u64 *link_frequencies;
  unsigned int nr_of_link_frequencies;
};

Members

base

fwnode endpoint of the v4l2_fwnode

bus_type

bus type

bus

bus configuration data structure

bus.parallel

embedded struct v4l2_fwnode_bus_parallel. Used if the bus is parallel.

bus.mipi_csi1

embedded struct v4l2_fwnode_bus_mipi_csi1. Used if the bus is MIPI Alliance’s Camera Serial Interface version 1 (MIPI CSI1) or Standard Mobile Imaging Architecture’s Compact Camera Port 2 (SMIA CCP2).

bus.mipi_csi2

embedded struct v4l2_fwnode_bus_mipi_csi2. Used if the bus is MIPI Alliance’s Camera Serial Interface version 2 (MIPI CSI2).

link_frequencies

array of supported link frequencies

nr_of_link_frequencies

number of elements in link_frequenccies array

V4L2_FWNODE_PROPERTY_UNSET

V4L2_FWNODE_PROPERTY_UNSET ()

identify a non initialized property

Parameters

Description

All properties in struct v4l2_fwnode_device_properties are initialized to this value.

enum v4l2_fwnode_orientation

possible device orientation

Constants

V4L2_FWNODE_ORIENTATION_FRONT

device installed on the front side

V4L2_FWNODE_ORIENTATION_BACK

device installed on the back side

V4L2_FWNODE_ORIENTATION_EXTERNAL

device externally located

struct v4l2_fwnode_device_properties

fwnode device properties

Definition

struct v4l2_fwnode_device_properties {
  enum v4l2_fwnode_orientation orientation;
  unsigned int rotation;
};

Members

orientation

device orientation. See enum v4l2_fwnode_orientation

rotation

device rotation

a link between two endpoints

Definition

struct v4l2_fwnode_link {
  struct fwnode_handle *local_node;
  unsigned int local_port;
  unsigned int local_id;
  struct fwnode_handle *remote_node;
  unsigned int remote_port;
  unsigned int remote_id;
};

Members

local_node

pointer to device_node of this endpoint

local_port

identifier of the port this endpoint belongs to

local_id

identifier of the id this endpoint belongs to

remote_node

pointer to device_node of the remote endpoint

remote_port

identifier of the port the remote endpoint belongs to

remote_id

identifier of the id the remote endpoint belongs to

enum v4l2_connector_type

connector type

Constants

V4L2_CONN_UNKNOWN

unknown connector type, no V4L2 connector configuration

V4L2_CONN_COMPOSITE

analog composite connector

V4L2_CONN_SVIDEO

analog svideo connector

connector link data structure

Definition

struct v4l2_connector_link {
  struct list_head head;
  struct v4l2_fwnode_link fwnode_link;
};

Members

head

structure to be used to add the link to the struct v4l2_fwnode_connector

fwnode_link

struct v4l2_fwnode_link link between the connector and the device the connector belongs to.

struct v4l2_fwnode_connector_analog

analog connector data structure

Definition

struct v4l2_fwnode_connector_analog {
  v4l2_std_id sdtv_stds;
};

Members

sdtv_stds

sdtv standards this connector supports, set to V4L2_STD_ALL if no restrictions are specified.

struct v4l2_fwnode_connector

the connector data structure

Definition

struct v4l2_fwnode_connector {
  const char *name;
  const char *label;
  enum v4l2_connector_type type;
  struct list_head links;
  unsigned int nr_of_links;
  union {
    struct v4l2_fwnode_connector_analog analog;
  } connector;
};

Members

name

the connector device name

label

optional connector label

type

connector type

links

list of all connector struct v4l2_connector_link links

nr_of_links

total number of links

connector

connector configuration

connector.analog

analog connector configuration struct v4l2_fwnode_connector_analog

enum v4l2_fwnode_bus_type

Video bus types defined by firmware properties

Constants

V4L2_FWNODE_BUS_TYPE_GUESS

Default value if no bus-type fwnode property

V4L2_FWNODE_BUS_TYPE_CSI2_CPHY

MIPI CSI-2 bus, C-PHY physical layer

V4L2_FWNODE_BUS_TYPE_CSI1

MIPI CSI-1 bus

V4L2_FWNODE_BUS_TYPE_CCP2

SMIA Compact Camera Port 2 bus

V4L2_FWNODE_BUS_TYPE_CSI2_DPHY

MIPI CSI-2 bus, D-PHY physical layer

V4L2_FWNODE_BUS_TYPE_PARALLEL

Camera Parallel Interface bus

V4L2_FWNODE_BUS_TYPE_BT656

BT.656 video format bus-type

NR_OF_V4L2_FWNODE_BUS_TYPE

Number of bus-types

int v4l2_fwnode_endpoint_parse(struct fwnode_handle *fwnode, struct v4l2_fwnode_endpoint *vep)

parse all fwnode node properties

Parameters

struct fwnode_handle *fwnode

pointer to the endpoint’s fwnode handle

struct v4l2_fwnode_endpoint *vep

pointer to the V4L2 fwnode data structure

Description

This function parses the V4L2 fwnode endpoint specific parameters from the firmware. There are two ways to use this function, either by letting it obtain the type of the bus (by setting the vep.bus_type field to V4L2_MBUS_UNKNOWN) or specifying the bus type explicitly to one of the enum v4l2_mbus_type types.

When vep.bus_type is V4L2_MBUS_UNKNOWN, the function will use the “bus-type” property to determine the type when it is available. The caller is responsible for validating the contents of vep.bus_type field after the call returns.

As a deprecated functionality to support older DT bindings without “bus-type” property for devices that support multiple types, if the “bus-type” property does not exist, the function will attempt to guess the type based on the endpoint properties available. NEVER RELY ON GUESSING THE BUS TYPE IN NEW DRIVERS OR BINDINGS.

It is also possible to set vep.bus_type corresponding to an actual bus. In this case the function will only attempt to parse properties related to this bus, and it will return an error if the value of the “bus-type” property corresponds to a different bus.

The caller is required to initialise all fields of vep, either with explicitly values, or by zeroing them.

The function does not change the V4L2 fwnode endpoint state if it fails.

NOTE

This function does not parse “link-frequencies” property as its size is not known in advance. Please use v4l2_fwnode_endpoint_alloc_parse() if you need properties of variable size.

Return

0 on success or a negative error code on failure:

-ENOMEM on memory allocation failure -EINVAL on parsing failure -ENXIO on mismatching bus types

void v4l2_fwnode_endpoint_free(struct v4l2_fwnode_endpoint *vep)

free the V4L2 fwnode acquired by v4l2_fwnode_endpoint_alloc_parse()

Parameters

struct v4l2_fwnode_endpoint *vep

the V4L2 fwnode the resources of which are to be released

Description

It is safe to call this function with NULL argument or on a V4L2 fwnode the parsing of which failed.

int v4l2_fwnode_endpoint_alloc_parse(struct fwnode_handle *fwnode, struct v4l2_fwnode_endpoint *vep)

parse all fwnode node properties

Parameters

struct fwnode_handle *fwnode

pointer to the endpoint’s fwnode handle

struct v4l2_fwnode_endpoint *vep

pointer to the V4L2 fwnode data structure

Description

This function parses the V4L2 fwnode endpoint specific parameters from the firmware. There are two ways to use this function, either by letting it obtain the type of the bus (by setting the vep.bus_type field to V4L2_MBUS_UNKNOWN) or specifying the bus type explicitly to one of the enum v4l2_mbus_type types.

When vep.bus_type is V4L2_MBUS_UNKNOWN, the function will use the “bus-type” property to determine the type when it is available. The caller is responsible for validating the contents of vep.bus_type field after the call returns.

As a deprecated functionality to support older DT bindings without “bus-type” property for devices that support multiple types, if the “bus-type” property does not exist, the function will attempt to guess the type based on the endpoint properties available. NEVER RELY ON GUESSING THE BUS TYPE IN NEW DRIVERS OR BINDINGS.

It is also possible to set vep.bus_type corresponding to an actual bus. In this case the function will only attempt to parse properties related to this bus, and it will return an error if the value of the “bus-type” property corresponds to a different bus.

The caller is required to initialise all fields of vep, either with explicitly values, or by zeroing them.

The function does not change the V4L2 fwnode endpoint state if it fails.

v4l2_fwnode_endpoint_alloc_parse() has two important differences to v4l2_fwnode_endpoint_parse():

  1. It also parses variable size data.

  2. The memory it has allocated to store the variable size data must be freed using v4l2_fwnode_endpoint_free() when no longer needed.

Return

0 on success or a negative error code on failure:

-ENOMEM on memory allocation failure -EINVAL on parsing failure -ENXIO on mismatching bus types

parse a link between two endpoints

Parameters

struct fwnode_handle *fwnode

pointer to the endpoint’s fwnode at the local end of the link

struct v4l2_fwnode_link *link

pointer to the V4L2 fwnode link data structure

Description

Fill the link structure with the local and remote nodes and port numbers. The local_node and remote_node fields are set to point to the local and remote port’s parent nodes respectively (the port parent node being the parent node of the port node if that node isn’t a ‘ports’ node, or the grand-parent node of the port node otherwise).

A reference is taken to both the local and remote nodes, the caller must use v4l2_fwnode_put_link() to drop the references when done with the link.

Return

0 on success, or -ENOLINK if the remote endpoint fwnode can’t be found.

drop references to nodes in a link

Parameters

struct v4l2_fwnode_link *link

pointer to the V4L2 fwnode link data structure

Description

Drop references to the local and remote nodes in the link. This function must be called on every link parsed with v4l2_fwnode_parse_link().

void v4l2_fwnode_connector_free(struct v4l2_fwnode_connector *connector)

free the V4L2 connector acquired memory

Parameters

struct v4l2_fwnode_connector *connector

the V4L2 connector resources of which are to be released

Description

Free all allocated memory and put all links acquired by v4l2_fwnode_connector_parse() and v4l2_fwnode_connector_add_link().

It is safe to call this function with NULL argument or on a V4L2 connector the parsing of which failed.

int v4l2_fwnode_connector_parse(struct fwnode_handle *fwnode, struct v4l2_fwnode_connector *connector)

initialize the ‘struct v4l2_fwnode_connector

Parameters

struct fwnode_handle *fwnode

pointer to the subdev endpoint’s fwnode handle where the connector is connected to or to the connector endpoint fwnode handle.

struct v4l2_fwnode_connector *connector

pointer to the V4L2 fwnode connector data structure

Description

Fill the struct v4l2_fwnode_connector with the connector type, label and all enum v4l2_connector_type specific connector data. The label is optional so it is set to NULL if no one was found. The function initialize the links to zero. Adding links to the connector is done by calling v4l2_fwnode_connector_add_link().

The memory allocated for the label must be freed when no longer needed. Freeing the memory is done by v4l2_fwnode_connector_free().

Return

  • 0 on success or a negative error code on failure:

  • -EINVAL if fwnode is invalid

  • -ENOTCONN if connector type is unknown or connector device can’t be found

add a link between a connector node and a v4l2-subdev node.

Parameters

struct fwnode_handle *fwnode

pointer to the subdev endpoint’s fwnode handle where the connector is connected to

struct v4l2_fwnode_connector *connector

pointer to the V4L2 fwnode connector data structure

Description

Add a new struct v4l2_connector_link link to the struct v4l2_fwnode_connector connector links list. The link local_node points to the connector node, the remote_node to the host v4l2 (sub)dev.

The taken references to remote_node and local_node must be dropped and the allocated memory must be freed when no longer needed. Both is done by calling v4l2_fwnode_connector_free().

Return

  • 0 on success or a negative error code on failure:

  • -EINVAL if fwnode or connector is invalid or connector type is unknown

  • -ENOMEM on link memory allocation failure

  • -ENOTCONN if remote connector device can’t be found

  • -ENOLINK if link parsing between v4l2 (sub)dev and connector fails

int v4l2_fwnode_device_parse(struct device *dev, struct v4l2_fwnode_device_properties *props)

parse fwnode device properties

Parameters

struct device *dev

pointer to struct device

struct v4l2_fwnode_device_properties *props

pointer to struct v4l2_fwnode_device_properties where to store the parsed properties values

Description

This function parses and validates the V4L2 fwnode device properties from the firmware interface, and fills the struct v4l2_fwnode_device_properties provided by the caller.

Return

% 0 on success -EINVAL if a parsed property value is not valid

parse_endpoint_func

Typedef: Driver’s callback function to be called on each V4L2 fwnode endpoint.

Syntax

int parse_endpoint_func (struct device *dev, struct v4l2_fwnode_endpoint *vep, struct v4l2_async_subdev *asd)

Parameters

struct device *dev

pointer to struct device

struct v4l2_fwnode_endpoint *vep

pointer to struct v4l2_fwnode_endpoint

struct v4l2_async_subdev *asd

pointer to struct v4l2_async_subdev

Return

  • 0 on success

  • -ENOTCONN if the endpoint is to be skipped but this should not be considered as an error

  • -EINVAL if the endpoint configuration is invalid

int v4l2_async_notifier_parse_fwnode_endpoints(struct device *dev, struct v4l2_async_notifier *notifier, size_t asd_struct_size, parse_endpoint_func parse_endpoint)

Parse V4L2 fwnode endpoints in a device node

Parameters

struct device *dev

the device the endpoints of which are to be parsed

struct v4l2_async_notifier *notifier

notifier for dev

size_t asd_struct_size

size of the driver’s async sub-device struct, including sizeof(struct v4l2_async_subdev). The struct v4l2_async_subdev shall be the first member of the driver’s async sub-device struct, i.e. both begin at the same memory address.

parse_endpoint_func parse_endpoint

Driver’s callback function called on each V4L2 fwnode endpoint. Optional.

Description

DEPRECATED! This function is deprecated. Don’t use it in new drivers. Instead see an example in cio2_parse_firmware() function in drivers/media/pci/intel/ipu3/ipu3-cio2.c .

Parse the fwnode endpoints of the dev device and populate the async sub- devices list in the notifier. The parse_endpoint callback function is called for each endpoint with the corresponding async sub-device pointer to let the caller initialize the driver-specific part of the async sub-device structure.

The notifier memory shall be zeroed before this function is called on the notifier.

This function may not be called on a registered notifier and may be called on a notifier only once.

The struct v4l2_fwnode_endpoint passed to the callback function parse_endpoint is released once the function is finished. If there is a need to retain that configuration, the user needs to allocate memory for it.

Any notifier populated using this function must be released with a call to v4l2_async_notifier_cleanup() after it has been unregistered and the async sub-devices are no longer in use, even if the function returned an error.

Return

0 on success, including when no async sub-devices are found

-ENOMEM if memory allocation failed -EINVAL if graph or endpoint parsing failed Other error codes as returned by parse_endpoint